ETS7000

SKU: ETS7000

BRAND: Communica

In Stock
R 14,421.00_{(inc VAT)}
R 12,540.00_{(ex VAT)}

Collections: IoT, Internet of things, specials

Category: Iot, Specials, Training Kits

Analog/Digital Training System

Specifications

1. Solderless breadboard : AD-222 | Interconnected with 2712 tie points nickel plated contact, fits all components with DIP sizes and solid wire AWG #22-30(0.3~0.8mm). It can be changed and replaced for different purpose and can be connected with demonstration panel. Therefore, it is very convenient for both teachers and students.
2. DC power supply :

(1) Fixed DC output : +5V ±10%, 1A
(2) Fixed DC output : -5V ±10%, 300mA
(3) Variable DC output : 0V ~ +15V±10%, 500mA
(4) Variable DC output : 0V ~ -15V ±10%, 500mA

3. Potentiometers :

(1) Variable resistor VR1 = 1Kohm (B)
(2) Variable resistor VR2 = 100Kohm (B)

4. Function generator

(1) Frequency ranges (6 ranges) :

0.1 Hz ~ 2 Hz
1 Hz ~ 20 Hz
10 Hz ~ 200 Hz
100 Hz ~ 2K Hz
1KHz ~20K Hz
10KHz ~200K Hz

(2) Amplitude :

Sine wave output : 0~5Vpp±10% variable
Triangle wave output : 0~5Vpp±10% variable
Square wave output : 0~15Vpp±10% variable
TTL mode output : +5V ±10%

5. Universal counter

(1) Frequency range : 1Hz~99.999999MHz | 10Hz~100.00000MHz
(2) Period range TH&TL : 0.01us ~ 99999999us
(3) Input sig al:TTL or CMOS level or any level(Vmin>=+2.3Vp ±10%)
(4) Display : 8-digit 7-segment LED display
(5) Counter switch : External/internal

6. Eight bits data switches :

When toggle switch is set at "down" position, the output is LO level; on the contrary, it will be HI level while setting at "up" position

7. Speaker : 2-1/4 inch diameter, 8ohm/0.25W to be used for load
8. Four channel adaptor : Both the two banana sockets' and two BNC jacks' point tips are changeable. They are suitable to connect ETS-7000 with peripherals.
9. Two digits of segment LED display :

Output display
Numerical designs and resultant displays

10. Two pulse switch (with 2 sets of output: A, A(not), B, B(not)):

2 pcs of push-buttons contain switches debouncer for eliminating the bounce caused by switch from "open" to "close" or from "close" to "open" position

11. 8 bits LED display:

Eight red LED's separate input terminals. The LED will be lighted up when input is at "HI level", and it will be turned off when it is at no input or at "LO level"

12. Universal connector fixed holder:

It reserves universal connector fixed holder on the panel in order to be connected with various universal connectors as follows :

Standard accessory :

UC-06 Centronic connector

Optional accessories :

UC-01 : Card edge connector 2.54 mm 62pin
UC-02 : RS-232 connector 25pin D sub connector, male & female
UC-03 : Straight header 60pin
UC-04 : Card edge connector 3.96 mm 56pin

13. Other standard accessories:

Power cord
Pin : 6pcs
User manual

14. Dimensions : 325 x 250 x 95 mm (L x W x H)
15. Weight : 4.3kg

Downloads

Datasheet - ETS7000

Additional Information

Device

Analog/Digital Training System

VIEW CART