CMU STEPPER MOTOR DRIVER DMA860H - Motors, Motor Drivers & Controllers -

CMU STEPPER MOTOR DRIVER DMA860H
DMA860H CNC Stepper Drive Stepping Motor Driver

Name: CMU STEPPER MOTOR DRIVER DMA860H - Communica [Part No: CMU STEPPER MOTOR DRIVER DMA860H]
Brand: Communica
SKU: CMU STEPPER MOTOR DRIVER DMA860H
Price: 956.52 ZAR
Availability: OutOfStock

SKU: CMU STEPPER MOTOR DRIVER DMA860H

BRAND: Communica

Sold Out
R 1,100.00_{(inc VAT)}
R 956.52_{(ex VAT)}

Or split into 4x interest-free
payments of R239.13 Learn more

Collections: 3D Printing & Accessories, DIY Kits, IoT, Internet of things, Robotics

Type: Motors, Motor Drivers & Controllers

Category: Iot, Stepper Drivers

Stepper Motor Driver

Overview

The MA860H is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives on the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors

Features

Extremely cost-effective
Good high speed performance
Supply voltage up to 80VAC or +110VDC
Output current up to 7.2A
Self-adjustment technology
Pure-sinusoidal current control technology
Pulse input frequency up to 300 KHz
TTL compatible and optically isolated input
Automatic idle-current reduction
16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
Suitable for 2-phase and 4-phase motors
Support PUL/DIR and CW/CCW modes
Short-voltage, over-voltage, over-current and short-cicuit protection

Specifications

MA860H microstepping drive
Input voltage : Up to +80VAC or +110VDC
Output current : Up to 7.2A
Pulse input frequency : up to 300 KHz
Automatic idle-current reduction
Over-voltage, over-current protection
Suitable for : 2-phase and 4-phase motors
Support : PUL/DIR and CW/CCW modes
Operating Temperature : 70 C

Power and Motor Terminal Assignments

Terminal No.	Terminal Name	Description
Terminal 1	+Vdc	Power supply, 20~30 VDC, Including voltage fluctuation and EMF voltage.
Terminal 2	GND	Power ground
Terminal 3	A+	Motor Phase A+
Terminal 4	A-	Motor Phase A-
Terminal 5	B+	Motor Phase B+
Terminal 6	B-	Motor Phase B-

Pulse and Direction Inputs

Terminal No.	Terminal Name	Description
Terminal 1	PUL+	Pulse +ve input
Terminal 2	PUL-	Pulse -ve input
Terminal 3	DIR+	Direction +ve input
Terminal 4	DIR-	Direction -ve input
Terminal 5	ENA+	Enable +ve input
Terminal 6	ENA-	Enable -ve input

Downloads

Datasheet - CMU STEPPER MOTOR DRIVER DMA860H

Additional Information

Device	Motor Driver
Type	Stepper